500ml PU Foam Insulation Cleaning For Removing Uncured / Cleaner Polyurethane Foam

Homey C100 economic uncured spray attachment polyurethane pu foam cleaner

INTRODUCTION

PU Foam Professional Cleaner C100 is special designed for removing the uncured (wet) polyurethane foam from hands, tools and gun application. The adapter may be used as a spray attachment, or the can may be connected to the gun to flush the barrel.

FEATURE

Designed specially for cleaning the foam gun.

Cleaner has a spray valve for removing the foam form the gun adapter.

It can be used in all position

Propellant gas is not harmful to the ozone layer.

INSTRUCTION

Shake the aerosol can for at least 30 seconds.

Spray the PU Foam Gun to clean the extra polyurethane foam attached on the gun.

Fit the gun on the adapter. Firmly screw the can on the adapter and turn the flow adjustment screw.

Gun out the cleaner to clean the gun.

Clean the extra polyurethane foam on skin, tools, floor, clothes and so on.

CAUTION

Keep away from heat, sparks, flames and static electricity;

Turn off sources of ignition (pilot light etc.).

Use in well-ventilated areas.

Keep out of the reach of children.

Can is under pressure. Do not burn or pierce, even after use.

In case of eye contact, flush with water and get immediate medical attention

Keep away from direct sunlight and do not expose temperatures over 50℃.

Store in upright position.

STORAGE&SHELF LIFE

36 months store in shade, cool and well ventilated place under 25℃ in unopened packing.

Always keep the can in an upright position.

Packing:

500ml

24PCS/CTN