PU Foam Professional Cleaner C100 is special designed for removing the uncured (wet) polyurethane foam from hands, tools and gun application. The adapter may be used as a spray attachment, or the can may be connected to the gun to flush the barrel.

FEATURE

INSTRUCTION

• Shake the aerosol can for at least 30 seconds.
• Spray the PU Foam Gun to clean the extra polyurethane foam attached on the gun.
• Fit the gun on the adapter. Firmly screw the can on the adapter and turn the flow adjustment screw.
• Gun out the cleaner to clean the gun.
• Clean the extra polyurethane foam on skin, tools, floor, clothes and so on.

CAUTION

• Keep away from heat, sparks, flames and static electricity;
• Turn off sources of ignition (pilot light etc.).
• Use in well-ventilated areas.
• Keep out of the reach of children.
• Can is under pressure. Do not burn or pierce, even after use.
• In case of eye contact, flush with water and get immediate medical attention
• Keep away from direct sunlight and do not expose temperatures over 50℃.
• Store in upright position.

STORAGE&SHELF LIFE

12 months store in shade, cool and well ventilated place under 25℃ in unopened packing. Always keep the can in an upright position.

VOLUME

500ml